POWER DIRECT VENT CO-AXIAL VENT MODELS

Power Direct Vent ASME and Non-ASME models utilize a co-axial concentric (pipe inside a pipe) venting system that draws air in for combustion through one pipe and exhausts products of combustion out the other. They are ideal for installations with a negative air pressure or corrosive air supply as can sometimes be found in restaurants, laundromats, hospitals, and tightly constructed buildings.

Product Highlights
Commercial Hydrojet<sup>®</sup>
Brass Drain Valve
Vitraglas<sup>®</sup>

Features

  • ICON HD™ Commercial Control System
  • OnGuard RMT™ System Compatible– Accessory Module Required
  • Electronic Ignition
  • Hydrojet® Sediment Reduction System
  • Vitraglas® Lining
  • Co-axial (Pipe Inside Pipe) Venting System with a Heavy-duty Aluminum Inner Wall and Galvanized Outer Wall
  • Venting up to 21 Feet Vertically or Horizontally
  • Hand Hole Cleanout
  • Max Temp - 180°F
  • NSF Construction Available
  • ASME Code Construction Available
  • 1 ½” NPT Dielectric Waterway Fittings
  • Low Restriction Brass Drain Valve
  • T&P Relief Valve Installed
  • Protective Magnesium Anode Rods
  • 1 1⁄8” Non-CFC Foam Insulation
  • 3–Year Limited Tank Warranty– can be upgraded to 5–Year at additional cost

Model Numbers

PDV-80T-300-3N(A) 80 Gallon Capacity Tall 300,000 BTU/Hr.
PDV-100T-360-3N(A) 100 Gallon Capacity Tall 360,000 BTU/Hr.

 

Product Literature

Click the links below to download the PDF files
POWER DIRECT VENT CO-AXIAL VENT
MODELS
MODEL NUMBERS
PDV-80T-300-3N PDV-100T-360-3N
Spec Sheet Parts List Operation Manual Service Manual Quick Service Guide
750-B 47848-B 238-47676-00B 48061-A PDV
Models Prior to New Control Box Integration
750-B 47177-B 238-41719-00J N/A N/A