| Residential Energy Saver Gas Upright 60 gallon water heater Bradford White is pleased to announce the addition of a new 60 gallon model to its line of residential atmospherically vented gas upright water heaters. This water heater will be available in both M-I and M-4 versions.
Features
The 60 gallon water heaters will have an input of 40,000 BTU/Hr for natural gas (38,000 BTU/Hr for LP) with a First Hour Delivery of approximately 90 gallons. The water heater will have a 3” diameter vent connector to allow applications that require a large volume of hot water without increasing the vent size.
The water heaters will be Flammable Vapor Ignition Resistant, and be equipped with our Defender Safety System® featuring the patented ScreenLok® Technology. The 60 gallon unit will also have the same features as the current M-I and M-4 heaters. In addition, the new water heaters will be equipped with the 3”x4” snap lock draft diverter previously mentioned in PB 032106.
Specification
Model Number |
Gas Type |
Dia. |
Ht. To Flue |
FHD |
Rec. 90ºF Rise |
Vent Dia. |
M-I-60T6FBN |
Natural |
22 |
60 3/4" |
90 gal |
42 gph |
3”x4” |
M-I-60T6FCX |
Propane |
22 |
60 3/4" |
87 gal |
40 gph |
3”x4” |
M-4-60T6FBN |
Natural |
24 |
60 3/4" |
90 gal |
42 gph |
3”x4” |
M-4-60T6FCX |
Propane |
24 |
60 3/4" |
87 gal |
40 gph |
3”x4” |
The 60 gallon residential atmospheric gas upright water heaters are manufactured according to ANSI standards (ANSI Z-21.10.1) and design certified by CSA International. Spec sheets (101-B-1006-A, and 104-B-1006-A) detail the features of these units and the options available.
As always, if there are any questions, please contact the Product Management Department, or your Regional Sales Manager at (1-800-523-2931).
PB110606
: back
| 
ABOUT BRADFORD WHITE
Find a Contractor
Check Your Warranty
RightSpec® Product Sizing Guide
Specs, Manuals, Parts Lists
Commercial Products
FAQ
Energy Factor, First Hour Ratings
Support & Service
International Sales
Safety Notifications
Laars • Niles • BWC-Canada